Classes
| Class Overview | Schedule/Objectives | Project Gallery | Class Resources |
IDP250J - Applied Design and Prototyping
This is a one credit class offered during the last week of Jterm. It is the third in a suite of hands-on classes that begin with AutoCad during week one, followed by Solidworks in week two. You must have taken either one of these CAD classes at some point before you can take IDP250.
This is an exciting class where we apply what we've learned in AutoCad or Solidworks, combine that with some design training, and build your own prototype!
The Smith Alumnae Quarterly wrote about us - Read it here!
Some comments from our first years class...
"This class was a ton of fun! I wish there were more like this offered!"
"It was the best credit I've earned at Smith."
"It is a great course to use all the CAD skills - hands on and practical"
Ok so what's it all about? Let's look at an example project.
Start with an idea...
 |
 |
 |
 |
..end up with with something real!
Contact Prof. Susannah Howe or Eric Jensen if you're interested in IDP250.
Clark Science Center > Contact Webmaster < Smith College 2006