|
During the loading process, the front panel will ask you to select
the vendor of your printing material. In the Media Selection menu,
you can choose HP or Others. If you use UV inks, you can also choose 3M.
hp or 3M
If you choose HP or 3M, you will be shown a list of printing materials.
Whichever you select, a media profile is already available
to define to the printer the precise characteristics of the material.
others
If you choose Others, you are offered a selection of
media profiles grouped by families (coated, photo, fine arts, textile, etc.).
Choose the family that seems closest to
the characteristics of your non-HP printing material.
After choosing a family, you have two different options:
- Choose profile to choose a specific media profile from the selected family.
Print sample if you need help to decide which media profile to use.
One sample will be printed for each media profile in the family;
this takes some minutes, depending on the printing material and
the print quality selected in the front panel.
When you have printed the samples, choose the media profile
that gives the best results for your printing material.
Remember which media profile you chose, so that you can use it again
the next time you use the same printing material.
RGB sample
CMYK sample
Many of our customers prefer high-grammage printing materials (about 170 g/mē),
and HP has provided a generic media profile best suited to such materials.
Choose Heavyweight Coated, and then HW Coated 2.
This profile is designed to give particularly good quality,
especially in Production mode.
In some cases it may be possible to select Production mode
although the non-HP printing material is not compatible with Production mode.
In such cases the printer will print in Productivity mode.
see also
printing materials and print speeds
how do I use rolls?
how do I use sheets?
|
