|
Unless you are troubleshooting any of the problems listed under Comments in the table below,
you should not need to change the default setting.
To change the graphics language setting, choose the  icon,
then Device Setup > Lang, where the following options are available:
| Language |
Comments |
| Automatic |
Choose Automatic to let the printer determine which type of file it is receiving.
This setting works for most software applications. |
| HP-GL/2 |
Choose this setting if you are not working with PostScript files, and you have experienced
image position problems or timing problems. |
| PostScript |
Choose PostScript if you are printing only PostScript files and your PostScript jobs do not include
PJL language switching commands. |
| TIFF, JPEG, PDF, CALS G4 |
Choose these options only if you are sending a file of the appropriate type directly
to the printer without going through a printer driver.
This is normally done only from WebAccess, in which case the language setting is done
by WebAccess and you do not have to do it yourself. |
|
