 |
|
|
- Did you press Cancel before all the data were received by the printer? If so, you have ended
the data transmission and will have to print the page again.
- The I/O Time-out setting may be too short. From the front panel, you can increase
the I/O Time-out setting to a longer period and then send the print again.
Choose the
 icon, then I/O Setup > I/O Timeout.
- There may be a communications problem between your computer and the printer. Check your interface cable.
- Check to make sure that your software settings are correct for your current page size
(e.g. long-axis prints).
- If you are using network software, make sure it has not timed out.
|
|
