|
|||||||
Director's OfficeEquipment Alarms
The following equipment is wired into the the building alarm system, i.e. Public Safety is automatically notified if an alarm condition exists. In case of alarm, the following procedure is executed:
If outside work hours, Public Safety will investigate on location and follow emergency procedure listed on the equipment.
Equipment connected to Public Safety alarmFire alarms SR220/219 Temperature sensor in ceiling (NMR room is supposed to maintain a constant temperature around 65 F) Any temperature problems will generally be repaired by Physical Plant's HVAC department. Cold rooms Alarm when temperature falls outside the parameters entered on cold room panel. Read dials to see what minimum and maximum temperature has been set. The digital display shows current temperature in Centigrade. Most of the cold rooms typically are set to have a temperature around 5C. Rooms also have audible alarm that can be reset on the panel. The following cold rooms are wired into the alarm system:
Go back to Science Center Director's Office - Main Page
|